Coil Audio CA-286 Mic/Line Amp PS6 Module
CA-286 MODULAR MIC/LINE AMPLIFIER
(Module Only, Rack Sold Separately.)
The CA-286 preamp module is a tribute to the classic 1950’s and 60’s European two-stage amplifier made popular by Telefunken™, Langevin™, Collins™, and Gates™. The CA-286 excels in HI-FI recording applications and provides the rich and detailed midrange often associated with vintage EF86 tube based preamps.
The CA-286 PS6 preamp module uses our own Coil Audio transformers, high quality capacitors, resistors, and NOS octal tubes and is powered by our PS6 Rack Tray and Power Supply.
The (INPUT) pad section contains a phase reverse switch, and a 6 position pad network. The first four positions are various 150/250 ohm mic pads; -6db, -12db, and -19db. The final two (LN 1 & LN 2) positions allow line-level signals to run through the amplifier providing tone-shaping capabilities while mixing from your DAW, Tape Machine, or other Line Level Devices – including other Preamps.
The (NF) control varies the amount of Negative Feedback present in the circuit. Counter-clockwise brightens and moves the sound forward while raising harmonics and sensitivity. Turning it clockwise increases negative feedback, producing a darker tone with a smooth, dampened harmonic structure.
The (HI) switch transitions from the natural openness of the tubes, to a gentle filtering of upper frequencies. The (LOW) switch reacts with the NF, boosting or cutting low frequency while moving the low end from front to back in the sound stage.
The Output control knob is placed between the 1st and 2nd stage EF86 tubes and sets the final Output level.
- Two-stage EF86/6267 pentode vacuum tube-based circuit
- 42 - 60 db of available gain
- Flexible input pad section for mic or line level operation
- Transformer balanced. 150 Ohm or 10k input, 600 Ohm output
- Interchangeable/Optional input and output transformers
- NOS tubes, signal caps & resistors, PEC 2W carbon pots
- Hand Built and Tested in the USA
Comes with Manufacturer's Warranty