The EQ5P is a DISCRETE Parametric Equalizer with some very unique features. Notice that the panel has no Q control. The filter Q control is in relation to the Boost and Cut control, and uses a "Constant Energy Curve" or known as "Proportional Q" that keeps the bandwidth wider at lower boost or cut levels and becomes narrow at higher boost or cut levels. This is musically pleasing. The curve is identical to many classic equalizers and is one of the reasons they are preferred over newer designs. When the PEAK button pressed, the 3 yellow "peak" buttons keep the width at a constant 1/3 octave for more precision control.


Discrete Design, with Custom Tonelux Opamps
Transformer Output Stage
High Frequency Shelf Button and selectable peaking bands
Proportional "Q" or Fixed 1/3 octave Modes

The TX5C uses the proprietary all discrete TX-240 op-amp and the all discrete TX-260 output stage with the TX-280 transformer. In addition to the Input/Compressor MIX knob, the TX5C has many other unique features not found on any compressor made today. The ability of being able to switch between Feed Back and Feed Forward compression is something that is not new to Paul Wolff. With the TX5C, he decided to take it one step further by allowing the ability to fade between Feed Back compression and Feed Forward compression with the TYPE control. This feature gives the engineer the freedom to combine the smooth nature of the Feed Back type of compression with the agressive effect of Feed Forward compression.

Discrete Design, with Custom Tonelux Opamps
Blending of Feed-Forward and Feed-Back Compression
Wet/Dry Mix control and Gain Make-up Control for Parallel Compression
6 LED Gain Reduction Meter
Over Compression and TILT EQ in the Side Chain

Self Powered, Can Power up to 8 Modules with the X4 expander!
International Universal Power Supply 425 m/amps per SLOT!
XLR Inputs and Outputs
All Steel Design, very Rugged

The X4 Gets its Power From the V4
XLR Inputs and Outputs for all Channels
8 Channel D-SUB Inputs and Outputs on the X4 for both Racks
Easy to Add onto the V4

The OTB16 is a 16 channel 1U mixer with 16 balanced inputs and a Tonelux discrete summing bus.
Each channel has a level control and a panner
The access to the OTB16 is through 2 eight channel Dsub inputs at a level of +4dBu nominal.
The summing of the 16 channels is through the famous Tonelux TX-240 and TX-260 discrete op-amps, and then throught the main output transformer, which can be adjusted by the MASTER fader pot, which comes out of a pair of XLR connectors.
Additionally there is a monitor output for monitoring or for expansion, which is balanced but transformerless.
2 additional balanced inputs to the MIX bus. The pre fader monitor output can be plugged into the BUS input to extend the number of channels with a second or third OTB16. 120 or 230 volts AC powered 50/60 Hz.

The TILT 8 channel tilt box with polarity switches and the famous TILT control. Perfect for a quick 8 channels of EQ on Drums, Room, Audience, WHATEVER YOU NEED FAST! Channels 1 & 2 have XLR I/O, Channel 1-8 is on dSUB I/O.

The EQUALUX is a DISCRETE Parametric Equalizer with some very unique features. Notice that the panel has no Q control. The filter Q control is in relation to the Boost and Cut control, and uses a "Constant Energy Curve" or known as "Proportional Q" that keeps the bandwidth wider at lower boost or cut levels and becomes narrow at higher boost or cut levels. This is musically pleasing. The curve is identical to many classic equalizers and is one of the reasons they are preferred over newer designs. When the PEAK button pressed, the 4 yellow "peak" buttons keep the width at a constant 1/3 octave for more precision control. The High Frequency has a Shelving button as well as a Peak button, a new feature for the EQUALUX. By popular request, we have also added a Low Frequency Shelving switch, so the EQUALUX can now control HIGH and LOW shelving as well as Peaking for all four bands.