 |
KEL HM-1 Microphone
The HM-1 is a compact rugged condenser microphone that will give you more options in the studio, thereby increasing your creative potential.
Unlike most affordable mics, the HM-1 doesn't rely on excessive high frequency boosting to create artificial "clarity". Instead it's been engineered to have a full smooth character. These qualities allow the mic to sound good even when micing edgy or thin sounding sources. It also means the HM-1 can help you add variety and sonic interest to your recordings without having to always reach for the EQ.
- Element: 0.5" Pressure Gradient Transducer
- Polar Pattern: Cardioid
- Frequency Response: 30Hz-20kHz
- Sensitivity: -38dB±2dB (0dB=1V/Pa at 1kHz)
- Self Noise: =18dB A
- Impedance: 200 ohms
- Max. Input SPL: 134dB (at 1kHz 1% THD)
- S/N Ratio: 76 dB(A)
- Output Impedence: 200O
- Phantom Power Requirement: 48V DC
- Body Dimensions: 2" x 5"
| Our Price: $179.00
|
 |
KEL HM-2d Microphone The HM-2d is a unique large diaphragm condenser mic voiced to sound big and beefy -- like a quality dynamic mic.
Use the HM-2d on electric guitar amps, outside of kick drums, on horns, harmonica, high-strung instruments, and vocals. Basically put it up whenever you want a smooth old-school vibe instead of the hash and grit of low priced tube mics, or the mud of some of the inexpensive off-shore ribbon mics flooding the market, recently.
Also, because the HM-2d is a transformerless condenser mic, it's far less susceptible to the loading effects that can drastically change the sound of dynamic mics from one pre-amp to the next. It's got a round top end with a fast bottom for a sound that's clear yet tight. It's a truly unique and eminently useful sound. The frequency response varies only about 2 dB between 70 Hz and 12 kHz.
- Element: 1-inch externally biased center-terminated capsule
- Polar Pattern: "Small Supercardioid"
- Frequency Response: 30Hz-16kHz
- Sensitivity: -35dB±2dB (0dB=1V/Pa)
- Self Noise: =14dB A
- Impedance: 200 ohms
- Max. Input SPL: 135dB (at 1kohm)
- S/N Ratio: 80 dB(A)
- Output Impedence: 200O
- Phantom Power Requirement: 48V
| Our Price: $199.00
|
 |
KEL HM-7U Microphone We start with a quality capsule featuring a K47-style backplate to get the basic sound in place. Instead of crappy tubes and junky transformers we use a proven class-A, dual-FET, transformerless circuit with premium WIMA film capacitors to squeeze out all the rich detail the capsule has to offer.
We also add extra features including a low cut filter to control sub-harmonic rumble, a -10dB pad to help handle extra loud sources, plus a handy phantom power LED indicator so you know when the mic is active on stage or when recording.
The HM-7U has a thick glossy sound with good transient detail well suited to lead and back-up vocals, kick drums and toms, upright bass, woodwinds, piano, mandolin and more.
Comes with a shock mount, swivel mount and flight case.
-
Element: 1.1" K47-type condenser capsule
-
Polar Pattern: "Small Supercardioid"
-
Frequency Response: 20Hz-20kHz
-
Sensitivity: -38±2dB (0dB=1V/Pa at 1kHz)
-
Output Impedance: 55O±30% (at 1kHz)
-
Equivalent Noise Level: 14dB A
-
S/N Ratio: 80dB
-
Max. Input SPL: 132dB(at 1kHz=1% T.H.D)
-
Body Dimensions: 51x182mm
| Our Price: $349.00
|
