 |
|
 |
Unlike most ribbon motors designed today with an offset ribbon the new Cascade FAT HEAD houses a hand-tuned ribbon element that incorporates the legendary symmetrical ribbon design. This design offers a true figure 8 pattern. The corrugated aluminum membrane itself is positioned in the center from front to back, thus producing a balanced audio input signal to both sides of the ribbon assembly. This design is very useful when executing a mid-side or Blumlein recording set-up and also great for live stage use. The FAT HEAD warm full-bodied signature and increased sensitivity is what you would expect and demand from a professional ribbon microphone and the FAT HEAD delivers. The FAT HEAD is suited for guitar cabinets, drum over-heads, vocal, piano, horns, strings and much more.
| |
 |
w/Stereo Bar
The FAT HEAD stereo package that includes the Blumlein Bar. If you don't already own a Cascade FAT HEAD, now is the time.
| |
|
Fitted with Swedish Made - Lundahl LL2912 Transformer. | |
|
w/Stereo Bar
The FAT HEAD L stereo package that includes the Blumlein Bar. If you don't already own a Cascade FAT HEAD, now is the time.
Fitted with Swedish Made - Lundahl LL2912 Transformer | |
|
Radian Grill w/Cinemag CM9888 Transformer.
| |
|
w/Stereo Bar
The FAT HEAD C stereo package that includes the Blumlein Bar. If you don't already own a Cascade FAT HEAD, now is the time.
Radian Grill w/Cinemag CM9888 Transformer. | |
 |
NOW includes a Premium Shockmount. New Super-Wide Radian Grill Design
Legendary symmetrical ribbon design is incorporated into the FAT HEAD II
| |
 |
NOW includes a Premium Shockmount. New Super-Wide Radian Grill Design
Legendary symmetrical ribbon design is incorporated into the FAT HEAD II
Includes Stereo Bar!
| |
|
Fitted with Swedish Made - Lundahl LL2912 Transformer. NOW includes a Premium Shockmount. New Super-Wide Radian Grill Design
Legendary symmetrical ribbon design is incorporated into the FAT HEAD II
| |
|
Fitted with Swedish Made - Lundahl LL2912 Transformer. NOW includes a Premium Shockmount. New Super-Wide Radian Grill Design
Legendary symmetrical ribbon design is incorporated into the FAT HEAD II
| |
|
Fitted with Cinemage CM9888. NOW includes a Premium Shockmount. Radian Grill Design.
| |
|
Fitted with Cinemag CM9888. NOW includes a Premium Shockmount. Radian Grill Design.
| |
 |
5 Micron symmetrical ribbon designed for live applications.
| |
|
With Lundahl Transformer
| |
|
With Cinemag Transformer
| |
 |
The new Cascade Microphones "Gomez" Michael Joly Edition ribbon mic uses a short, single-ribbon motor for broad vertical and horizontal pickup free from the off-axis coloration found in dual ribbon mics. The structure of the "Gomez" ribbon motor provides a tailored high frequency response ideal for guitar cab use or vintage-sounding "soft top" vocals. In a new innovation, the ribbon motor is installed in an optimized headbasket ? a round, single layer grille designed to offer an open sound with reduced internal standing waves. | |
 |
Visually, the C77 is reminiscent of classic ribbon microphones of the past but with a twist. Here at Cascade we have been listening to customer feedback and have designed our premium series of microphones to meet the wants, needs, and desires of all studio users while still keeping our products at an affordable price. The C77 comes fitted with a Lundahl LL2913 transformer mounted on a custom PCB board, along with Evidence Audio solid-core copper wire and a Chicago Switchcraft XLR connector. | |
 |
The ELROY tube condenser microphone features a unique shock-absorbing capsule design that eliminates the need for an external shockmount, thus the yoke adaptor. Triode-wired and fitted with a specially selected 6J1 tube, the Elroy ensures low noise and the warmth you are looking for. The included polar patterns are: cardioid, figure-eight and omni-directional which are available via a 3-position switch on the front side. And also included on the rear of the microphone is a dual position switch that controls the bass roll-off and pad functions. This large diaphragm tube microphone is capable of recording a wide variety of instruments and a many types of vocal ranges. Take advantage of the new ELROY; "best value on the market today". | |
 |
The DR-2 offers a brushed nickel grill, premium suspension shockmount and an upgraded aluminum case.
| |
|
Cascade DR-2L - Fitted with Swedish Made - Lundahl LL2913 Transformer. The DR-2 offers a brushed nickel grill, premium suspension shockmount and an upgraded aluminum case.
| |
 |
The X-15 Stereo ribbon microphone houses two separate matched ribbon motors that are positioned one above the other. The elements are offset 90 degrees and are configured in the Blumlein setup. Stereo separation is superb and off-axis coloration is minimal. Add in the excellent sensitivity and frequency response range the X-15 is ready for the big leagues. The fit and finish are of top quality and includes a premium suspension shockmount, thick padded vinyl pouch and an upgraded aluminum case. A 5-pin cable is included, the cable connects to a metal splitter box where two separate XLR connectors give access the to upper and lower ribbon motors. | |
 |
731R Retro - Old School Style Ribbon Microphone. Similar to the ribbon design that was used in the legendary RCA Type 44-BX. Unlike most ribbon motors designed today with an offset ribbon element the new Cascade 731R houses a hand-tuned dual ribbon element motor that incorporates the legendary symmetrical ribbon design. This design offers a true figure 8 pattern. The corrugated aluminum membrane itself is positioned in the center from front to back, thus producing a balanced audio input signal to both sides of the ribbon assembly. This design is very useful when executing a mid-side or Blumlein recording set-up and also great for live stage use. | |
|
731R Retro - Old School Style Ribbon Microphone with Lundahl Transformer | |
|
(Fitted with Lundahl LL2912 Transformers) The X-15 Stereo ribbon microphone houses two separate matched ribbon motors that are positioned one above the other. The elements are offset 90 degrees and are configured in the Blumlein setup. Stereo separation is superb and off-axis coloration is minimal. Add in the excellent sensitivity and frequency response range the X-15 is ready for the big leagues. The fit and finish are of top quality and includes a premium suspension shockmount, thick padded vinyl pouch and an upgraded aluminum case. A 5-pin cable is included, the cable connects to a metal splitter box where two separate XLR connectors give access the to upper and lower ribbon motors. | |
  |
The Cascade M39 is a cardioid condenser that has a 22mm diameter diaphragm. The Cascade M39 has a silky, open audio quality with a wide dynamic range essential for accurate, instrument recording and is ideal for use as drum over heads, hi-hat, snare, or acoustic instruments such as guitar and piano. The M39 features a high SPL rating of 137 dB and is capable of capturing even the loudest of audio sources. The M39 is a compact microphone that is great for recording a wide range of instruments and is in use in professional and project studios around the world
|
